iZone C325P2 Panasonic Air-Conditioner Interface Module
The iZone C325P2 is a communication interface designed to connect an iZone C225 control system with compatible Panasonic ducted air conditioners. It enables integrated air-conditioning and zoning control through the iZone touchscreen, temperature sensors and mobile app when a Smart Hub is installed.
Key Features
Integrates compatible Panasonic systems with the iZone C225 CPU
Controls system on/off, operating mode, set temperature and fan speed
Supports return-air, zone, master and RF temperature-sensor control
Compatible with selected Panasonic S-Series ducted systems
Compatible with selected Panasonic Nanoe X high-static ducted systems
Communication wiring is non-polarised
App control available when connected to an iZone Smart Hub
Compatibility
| Panasonic system | Compatibility |
|---|
| S-Series ducted systems | Selected models |
| Nanoe X high-static ducted systems | Selected models |
Always confirm the complete indoor and outdoor model numbers before ordering, as compatibility may vary between Panasonic product generations.
Connection Requirements
Connects to the indoor unit’s R1/R2 remote-controller terminals
Polarity is not critical
Requires shielded two-core twisted-pair control cable
Connect the R1/R2 wiring to the AC Unit Control Cable connection on the C225/C325P2
Nanoe X Operation
On compatible Panasonic Nanoe X systems, the Nanoe X function is enabled by default and operates whenever the indoor fan is running.
If Nanoe X needs to be disabled, it must be switched off using the Panasonic proprietary controller during commissioning.
Important Installation Information
The Panasonic air conditioner should be commissioned and any required manufacturer settings completed before removing the Panasonic controller and connecting iZone.
Source: iZone Panasonic compatibility documentation
