EBM-Papst S4E350-AN02CT 350mm AC Axial Fan with Guard Grille
The EBM-Papst S4E350-AN02CT is a 350mm single-phase AC axial fan assembly designed for refrigeration, air-conditioning and commercial ventilation applications.
Assembled in Australia, it combines an EBM-Papst A4E350-AN02-32 HyBlade fan with a protective steel guard grille, terminal box and connected capacitor. It delivers up to approximately 3,305m³/h of free-air volume.
Features
Genuine EBM-Papst axial fan assembly
Australian-assembled configuration
350mm HyBlade impeller
Protective steel guard grille
Maximum airflow approximately 3,305m³/h
Integrated terminal box and capacitor
Internally connected thermal overload protection
Maintenance-free ball bearings
IP44 protection when correctly assembled
Suitable for continuous operation
Specifications
| Specification | Details |
|---|
| Manufacturer | EBM-Papst |
| Model | S4E350-AN02CT |
| Base Fan Model | A4E350-AN02-32 |
| Motor Model | M4E074-DF |
| Fan Type | AC axial fan with guard grille |
| Fan Diameter | 350mm |
| Voltage | 230V AC |
| Phase | Single phase |
| Frequency | 50Hz |
| Rated Speed | 1,340 RPM |
| Maximum Free-Air Speed | Approximately 1,400 RPM |
| Maximum Airflow | Approximately 3,305m³/h |
| Power Consumption | 165W |
| Current Draw | 0.73A |
| Starting Current | 1.40A |
| Capacitor | 4µF |
| Capacitor Rating | 400V |
| Maximum Static Pressure | 90Pa |
| Sound Pressure Level | Up to 62dB(A) |
| Number of Blades | 5 |
| Blade Type | Sickle-shaped HyBlade |
| Rotation | Counter-clockwise when viewed toward the rotor |
| Airflow Direction | “V” direction |
| Protection Rating | IP44 |
| Insulation Class | Class F |
| Motor Protection | Internally connected thermal overload protector |
| Bearings | Ball bearings with low-temperature lubricant |
| Operating Mode | Continuous operation - S1 |
| Operating Temperature | -40°C to +40°C |
| Assembly Weight | Approximately 4.8-5.0kg |
| Guard Material | Phosphated steel with black coating |
| Terminal Box Material | ABS plastic |
| Electrical Connection | Integrated terminal box |
| Mounting Position | Shaft horizontal or rotor at bottom |
Typical Applications
Refrigeration condensers
Commercial refrigeration equipment
Air-conditioning condensing units
Heat pumps
HVAC ventilation systems
Equipment cooling
Replacement condenser fan assemblies
Configuration note: The full CT assembly number normally ends in -048 or -060. This identifies the specific guard-grille and mounting arrangement; the electrical and airflow specifications remain based on the A4E350-AN02-32 fan. Official EBM-Papst CT assembly instructions
