Fasco J090R05SJ 12.2W 240V Shaded-Pole Refrigeration Motor
The Fasco J090R05SJ is a compact 12.2W shaded-pole refrigeration motor designed for 240V single-phase operation. It operates at approximately 2600 RPM and features anti-clockwise rotation, Class B insulation, thermal-fuse protection and an IP20 open-frame construction.
The motor is supplied with a stainless-steel threaded shaft, long electrical leads and 6.3mm female quick-connect terminals for integration into compatible refrigeration equipment.
Features
12.2W rated output
240V single-phase operation
Two-pole shaded-pole motor
Approximately 2600 RPM
Anti-clockwise rotation
Air-over-motor duty
Integrated thermal-fuse protection
Class B insulation
IP20 open-frame construction
Stainless-steel 303 shaft
Right-hand threaded shaft
Long-life bearing with Marutemp lubrication
905mm electrical leads
6.3mm female quick-connect terminals
No external start or run capacitor specified
Mounting hardware supplied
Specifications
| Specification | Details |
|---|
| Manufacturer | Fasco Australia |
| Model | J090R05SJ |
| Drawing Number | J09OR05SJ |
| Product Type | Refrigeration motor |
| Motor Type | Shaded-pole |
| Rated Output | 12.2W |
| Supply Voltage | 240V AC |
| Frequency | 50Hz |
| Phase | Single-phase |
| Number of Poles | 2 |
| Rated Current | 0.45A |
| Rated Speed | 2600 ±100 RPM |
| Rotation | Anti-clockwise as shown on the manufacturer drawing |
| Duty | AOM – air-over-motor |
| Enclosure | Clip-on bobbin/open-frame construction |
| Protection Rating | IP20 |
| Insulation Class | Class B |
| Thermal Protection | Integrated thermal fuse |
| Winding | Single-speed shaded-pole |
| Capacitor | No start or run capacitor specified |
| Bearing | 626 VVMC3E |
| Bearing Lubricant | Marutemp |
| Shaft Material | Stainless steel 303 |
| Shaft Diameter | Approximately 3.92mm |
| Shaft Thread | 5/32-inch BSW, right-hand thread |
| Threaded Length | 11 ±0.5mm |
| Supply Lead Length | 905mm +10/−5mm |
| Lead Type | V90HT light-duty PVC cable |
| Lead Conductors | 24/0.2mm black and yellow/green |
| Terminal Type | Three 6.3mm female quick-connect terminals |
| Terminal Reference | Utilux H1972 or equivalent |
| Earth Provision | Yellow/green earth lead |
| Performance Specification | SPM53006-01 |
Dimensions
| Dimension | Measurement |
|---|
| Motor assembly length | 102.6mm |
| Frame width | 63.5mm |
| Overall height | 78.6mm +1mm |
| Motor body width | 47.6mm |
| Vertical mounting dimension | 66.0mm |
| Shaft diameter | Approximately 3.92mm |
| Threaded shaft length | 11 ±0.5mm |
| Minimum unthreaded shaft projection | 7mm |
| Cable sleeve | 9mm diameter × 0.5mm wall |
| Cable sleeve length | 750 ±3mm |
| Total lead length | 905mm +10/−5mm |
Connections
The motor is supplied with three 6.3mm female quick-connect terminals:
Electrical connection must follow the equipment manufacturer’s wiring diagram and applicable electrical regulations.
Supplied Mounting Hardware
Three 5/32-inch BSW zinc-plated hex nuts
Two 4mm zinc-plated internal shakeproof washers
One zinc-plated flat washer
Typical Applications
Refrigeration equipment
Refrigerated cabinet fan assemblies
OEM refrigeration fan applications
Replacement installations requiring matching electrical, rotational and dimensional specifications
Important Information
Confirm the existing motor identification before ordering.
Rotation is anti-clockwise as depicted in the Fasco specification drawing; verify the required viewing direction in the equipment.
This is an air-over-motor design and requires suitable equipment airflow for cooling.
The motor is rated IP20 and is not protected against water ingress.
Application suitability, mounting, airflow, shaft dimensions and electrical connections must be confirmed before installation.
Installation and electrical work must be completed by a suitably qualified technician.
Source: Fasco Australia J09OR05SJ Motor Specification.
