iZONE 325 HITACHI AC UNIT MODULE

iZone C325H Hitachi & Emerald Air-Conditioner Interface Module

The iZone C325H is a communication interface designed to connect an iZone C225 control system with compatible Hitachi and selected Emerald ducted air conditioners. It enables integrated air-conditioning and zoning control through the iZone touchscreen, temperature sensors and mobile app when a Smart Hub is installed.

Key Features

• Integrates compatible Hitachi and Emerald systems with the iZone C225 CPU

• Controls system on/off, operating mode, set temperature and fan speed

• Supports selected R410A and R32 ducted systems

• Supports return-air, zone, master and RF temperature-sensor control

• Suitable for compatible mid-static and high-static ducted units

• App control available when connected to an iZone Smart Hub

• Communication wiring is non-polarised

Hitachi Compatibility

Emerald Compatibility

These Emerald systems use the same communication method and wiring arrangement as compatible Hitachi systems.

Connection Requirements

• Connects to the indoor unit’s A/B communication terminals

• Emerald connection: TB2 terminals A and B

• Polarity is not critical

• Requires shielded two-core twisted-pair control cable

• Earth or shield must be terminated at the fan-coil end

• Communication cable is supplied by the installer

Important Installation Information

Do not apply external voltage to the A/B communication cable. The C325H is a communications interface and must only be connected to the specified low-voltage control terminals.

Always confirm the complete indoor and outdoor model numbers before ordering.

Sources: iZone Hitachi compatibility and iZone Emerald compatibility